100kW
12,16 kW
32 kWh
Energy thermal
Electrical power
Accumulation and storage of energy
Transform sunlight into electricity with photovoltaic system
Can be integrated with heat pump systems heat for heating and cooling
Store the excess energy with the built-in batteries
The Cube makes the most of the sun's energy and the wealth of the land, offering comfort, independence and effectiveness.
The machine is designed to work perfectly both in winter, providing heat for the heating and domestic hot water, in summer, by subtracting the heat of indoor environments in the cooling and continuing in the same time to produce domestic hot water.
Puissance électrique maximale produite
Energy storage batteries storage
The Cube is able to heat and cool a surface area of about a thousand square meters of a building in energy class A, to produce domestic hot water for the daily use of 20 people and produce electricity, covering up all the needs of the building, if necessary.
Thanks to its repeatability, it can make even large stand-alone buildings. The use of the Cube, compared to a traditional energy system, allows you to avoid the annual emission of approximately 30 tonnes of CO2.
CUBE S
CUBE M
CUBE L
Maximum amount of electrical power
3,04 kW
6,84 kW
12,16 kW
Electric storage batteries accumulation
8kWh
16kWh
32 kWh
Thermal power for integration heating with heat pump
10kW
50kW
100kW
Thermal power for integrating the cold with heat pump
50kW
Electrical energy
Heating and cooling
Hot water
During the heating cycle, the heat pump becomes thermal energy from the solar panels, while in the summer, the heat pump reverses its cycle, considering the environment to be conditioned as a hot source to which subtract from the heat.
The excess energy can be sent to the geothermal circuit to regenerate the characteristics of thermo-physical properties of the soil and ensure its performance over time.
The photovoltaic system in combination with the system of production of heat is working to the provision of electricity needed to power the heat pump, and the auxiliary board. When the production is high, an electric battery accumulates the surplus of energy and, through an inverter, sends it to the users.
Possibility to use the space inside of the machine as a local technical
High resistance to weather conditions severe
Warranty 10 years
The Cube is composed of a metal frame, tubular square (70x70x3), and its structure, designed to be dismantled and transported, is internal and is covered with solar panels and trim elements of metal. The welding is carried out exclusively at the factory to maintain all the standards of quality and efficiency.
The skeleton of the structure is made up of a square tubular positioned horizontally in the base and secured with brackets to the reinforced concrete slab of the stalls. The elements of nesting are welded at the corners of a square, and serve as the attachment to the four pillars of the angle.
The structure is closed by a second square of roof and also has pillars with elements angular.
The interior space of the structure, properly ventilated by surface micro-perforated to match the facade not exposed to the solar radiation, can operate as a true local technique.
Electrical power
Electric storage
Height
Length
Depth
3,04 kW
8kWh
2100 mm
2100 mm
2100 mm
6,84 kW
16kWh
3400 mm
3400 mm
3400 mm
12,16 kW
32 kWh
4200 mm
4200 mm
4200 mm
-4 ° F to 122 ° F / -20 ° C to 50 ° C
Fixed to the ground
YNOVA BELGIUM
Contact information:
Address: Rue Destrée 96/0.1,6001 Charleroi
Management: David Bogaert : +32 (0)474 93 69 74
PHONE : 02 315 43 69
VAT: BE 0535.791.376
E-MAIL : info@ynova.be / david@ynova.be
YNOVA accompanies you in your transformation digitale. Contact us to receive a comprehensive and tailored to your needs.
© 2020 YNOVA BELGIUM, ALL RIGHT RESERVED
